What Is Seasonal Adjust on a Sprinkler Controller in Celina, TX?

Seasonal adjust is a setting that makes your zones run longer or shorter by a percentage. At 100%, they run exactly as programmed. At 50%, for example, a 10-minute zone runs for 5 minutes. Which zones and programs it covers depends on your controller model and setup. It’s the fastest way to cut run times for cooler weather without reprogramming each zone. It doesn’t change your watering days or start times, though.

If you’ve spotted “Seasonal Adjust” on your controller and never touched it, you’re not alone. It’s one of the handiest settings on a sprinkler controller. Here’s how it works and how to use it in Celina.

How Does Seasonal Adjust Change Run Times?

Your controller stores a run time for each zone. Seasonal adjust applies a percentage to those run times. On many controllers it covers every zone at once, but the scope depends on the model and how it’s set up, so check your manual. Rain Bird sums up the idea: water less in the cool seasons and more in the hotter months.

For example, for a zone programmed at 10 minutes:

  • 100%: 10 minutes, exactly as programmed.
  • 70%: 7 minutes.
  • 50%: 5 minutes.

Your base program stays untouched. When the weather warms up, you raise one number instead of re-entering every zone.

What Doesn’t Seasonal Adjust Change?

This is where people get tripped up. Seasonal adjust only changes how long each zone runs. It doesn’t change:

  • Watering days. A program set for two days a week still runs two days a week.
  • Start times. Every start time still runs. Two start times at 50% is still two cycles.
  • Whether the system waters at all. Even the lowest setting still waters. To stop watering, use your controller’s off setting.

So when you cut back for winter, change your watering days too.

How Do You Use Seasonal Adjust on Common Controllers?

Every brand puts it in a slightly different spot. Here’s what the manufacturers document.

Rain Bird ESP-TM2

  1. Turn the dial to SEASONAL ADJUST.
  2. Press the arrow buttons to raise or lower the percentage. Rain Bird’s manual lists a range of 5% to 200%.
  3. Turn the dial back to AUTO RUN. Rain Bird’s manual says that’s the position where watering happens automatically.

Hunter X-Core

  1. Turn the dial to SEASONAL ADJUSTMENT.
  2. Press + or – to change it. Hunter lists a range of 10% to 150% of the original run times.
  3. Turn the dial to RUN. Hunter’s quick guide says the dial must be in RUN for automatic watering.

One catch: if your X-Core has a Hunter Solar Sync sensor, it updates the seasonal adjustment automatically each day, and manual changes get replaced at midnight.

What About Wi-Fi Controllers?

Rain Bird Automatic Seasonal Adjust: on supported Rain Bird Wi-Fi setups, the value can update itself. Rain Bird says it uses historical weather for your postal code, how accurate yesterday’s adjustment was, and tomorrow’s forecast, then sends the new value to the controller each night.

Hunter Hydrawise: the feature is called Monthly Adjustment. You set a percentage for each month in the app.

Rachio: the feature is called Seasonal Shift. It works on Fixed schedules and adjusts zone run times at the start of each month based on local historical weather.

Not listed here? Check your model’s manual or app before changing anything.

What Percentage Should You Use in Winter?

There’s no single right number. It depends on how your zones were programmed, your soil, what’s planted, and how much water each head puts out. A simple approach:

  1. Start lower than your summer setting. Cooler weather means plants use less water.
  2. Cut watering days, too. Seasonal adjust won’t do that for you. Our guide to winter sprinkler schedules explains how to check whether your yard needs water before each watering day.
  3. Check the yard, then fine-tune. Soggy spots or runoff mean it’s still too much. Dry soil during a long dry spell means you can give a little more on an allowed day.

The City of Celina says that by November 1, outdoor watering is generally no longer necessary because plants go dormant, and it suggests watering deeply but less often in winter, about every 15 to 20 days. That’s a guideline, not a schedule, so let rain and soil moisture decide.

What Are Celina’s Watering Rules Right Now?

Celina’s watering days and hours depend on the city’s current conservation stage, and the stage can change during the year. Before you set your schedule, check the City of Celina Water Conservation page and the city’s latest news for the current stage and your watering days. If anything is unclear, contact City of Celina utility customer service.

These are the city’s rules for City of Celina water customers. If another utility provides your water, follow its rules instead.

Common Seasonal Adjust Mistakes

  • Thinking a low percentage turns watering off. It doesn’t. The system still runs on every scheduled day.
  • Forgetting extra start times or a second program. Seasonal adjust shortens them, but they all still run.
  • Not returning the dial. On the Rain Bird ESP-TM2 and Hunter X-Core, automatic watering runs from AUTO RUN and RUN, so finish there.
  • Fighting a weather sensor. If Solar Sync or a Wi-Fi feature sets the value, manual changes won’t stick.
  • Forgetting to raise it in spring. A setting that’s right for January can leave your yard thirsty in May.

When Is It More Than a Setting?

If you’ve lowered seasonal adjust and the yard is still soggy, or a zone keeps running too long, the problem may not be the setting. A zone that won’t shut off, a leak, or a controller that won’t hold its program needs a closer look. Our article on whether your sprinkler controller could be causing a high water bill in Celina covers the warning signs, and our guide to a sprinkler controller that isn’t running on schedule walks through the settings to check first.

Want a second set of eyes on your settings? Book a sprinkler controller evaluation and we’ll go through your programs, seasonal adjust, and run times with you.

Frequently Asked Questions

What does seasonal adjust do on a sprinkler controller?

It raises or lowers the run times it covers by the percentage you choose. At 100%, zones run as programmed. Below 100%, they run shorter. Above 100%, they run longer.

Does seasonal adjust change my watering days?

No. It only changes run times. Change your watering days separately to fit Celina’s current rules.

Can I set seasonal adjust to 0% to turn my sprinklers off?

Not on these models. The Rain Bird ESP-TM2 goes down to 5% and the Hunter X-Core to 10%, so the system still runs. Use the controller’s off setting to stop watering.

Why does my seasonal adjust keep changing on its own?

Something is probably setting it automatically. A Hunter Solar Sync sensor updates the X-Core daily, and Rain Bird’s Automatic Seasonal Adjust updates supported Wi-Fi controllers each night.

What percentage should I use in winter?

There’s no single right number. Start lower than summer, cut watering days, and adjust based on rain and how moist the soil is.

Need Help Setting Your Controller for the Season?

Controller menus aren’t always friendly, and every brand is a little different. Our Celina team can check your programs, set seasonal adjust, and make sure your schedule fits the city’s current rules. Learn more about our sprinkler and irrigation services in Celina, or book a visit online at a time that suits you.

Whale Done’s irrigation work is performed under Texas irrigator license LI0029200.

Sources

Don't Forget to share this post!

Related Articles