A sprinkler controller fault message identifies a problem the timer detected. A station ERR or SHORT can point to an electrical fault; NO AC points to missing AC power. The exact meaning depends on the brand and model, so the code guides testing rather than proving which part needs replacement.
If a sprinkler controller fault message appears at your Fairview home, take a photo of the full display before clearing it. Include the station number and controller model. Those details help separate a zone problem from a controller problem.

Sprinkler Controller Fault Message: At a Glance
| Message | Brand and model | What it can point to | What to do now |
|---|---|---|---|
| Station number + ERR (e.g., 2 ERR) | Hunter Pro-C | Fault on the named station’s circuit. | Record the station number. Arrange checks of its wiring, connections and solenoid. |
| P ERR | Hunter Pro-C | Fault in the pump-start circuit, master valve or their wiring. | Record the message. Have that circuit checked before replacing parts. |
| NO AC | Hunter Pro-C | AC power is unavailable. | Check the model’s power instructions. Leave electrical repairs to a qualified professional. |
| SP ERR | Hunter Pro-C | SmartPort wiring or electrical noise. | Record the model and message; have accessory wiring checked. |
| SHORT | Rain Bird TRU | A shorted solenoid or master valve. | Have the wiring issue corrected before clearing the message; follow the TRU guide. |
Match the message to your exact model. Similar-looking codes can mean different things on different controllers.
Watch: Sprinkler Controller Showing ERR? Check This First
Before You Clear the Screen
Save a photo of the sprinkler controller fault message and write down when it appeared. If you clear it before recording the details, you may lose a useful clue. Follow your model’s manual rather than a reset sequence meant for a different controller.
What Is a Sprinkler Controller Fault Message?
Think of the controller as the part that tells each zone when to water. The valve solenoid is the electrical component that helps open that zone’s valve. On conventional wired systems, wiring connects the two.
Some controllers detect electrical faults and report them on the screen. That narrows the investigation, but it does not identify the failed part on its own.
Sprinkler Timer Error Codes: Hunter and Rain Bird
Hunter Pro-C: What 2 ERR Means
On a Hunter Pro-C, 2 ERR identifies a fault on station 2’s circuit. Hunter’s troubleshooting guidance calls for checking that station’s solenoid and wiring. The display does not prove which component failed. Our sprinkler solenoid guide explains what the valve’s electrical component does.

Rain Bird TRU: What SHORT Means
Rain Bird’s TRU troubleshooting guide connects a short message with a shorted solenoid or master valve. The guide says to correct the wiring issue before clearing the message. Follow the instructions for your specific Rain Bird model; its codes and controls may differ.
Hunter Pro-C: What P ERR Means
Hunter’s Pro-C manual describes P ERR as a fault in the pump-start circuit, master valve or their wiring. The message points to that circuit, not automatically to the controller itself. Have the circuit checked before replacing parts.
Hunter Pro-C: NO AC, SP ERR and a Blank Screen
On a Hunter Pro-C, NO AC means AC power is unavailable. SP ERR points to a SmartPort wiring or electrical-noise issue. A blank screen needs a power check using the model’s instructions; it does not identify a failed controller by itself. If this followed a power interruption, see our power-outage controller guide. If power is present but automatic watering skips its start, see our schedule troubleshooting guide.
Do Working Zones Rule Out a Bad Controller?
No. If several zones work and one does not, that is useful evidence. It helps focus testing on the affected circuit. But a controller can still have a problem with one output even while its other stations operate.
The practical step is to test before replacing. If damaged field wiring or a failed solenoid is the cause, changing the controller does not repair it. If testing identifies a controller output fault instead, the recommendation can reflect that result. Our guide to one sprinkler zone not working explains how to tell a controller problem from a zone problem before you replace anything.
What You Can Safely Do When a Sprinkler Controller Fault Message Appears
- Photograph the full message. Include any number, letter or symbol beside ERR or SHORT.
- Record the controller brand and model. The label may be on the face or inside the accessible front cover.
- Note which areas stopped watering and whether other zones have worked normally. You do not need to rerun a faulting zone to collect that information.
- Mention recent yard work. Digging, fencing or landscaping near irrigation wiring can be relevant to the diagnosis, but timing alone does not prove the cause.
- Look up the message in your manual. Follow the manufacturer’s instructions for clearing it.
Hunter’s Pro-C guide describes a terminal-swap test for a station ERR. Leave that wiring test to a qualified technician if you are not trained to do it; reconnecting wires incorrectly can change which zones the station numbers operate. Do not keep resetting a recurring fault. Leave electrical testing and repairs to someone qualified to do them. If you see scorching, smell burning or find water inside the controller, stop using it and arrange professional help. Do not repeatedly reset a breaker or GFCI that trips.
Fairview Watering Guidance Still Applies
A fault message is not a reason to add watering days or increase run times on unaffected zones. The Town of Fairview’s water and utility guidance lists a twice-weekly irrigation limit throughout the year and a 10 a.m. to 6 p.m. restriction from April 1 through October 31. Check current Town and water-provider guidance for your address before changing a schedule.
Common Mistakes to Avoid
- Replacing the controller based on a sprinkler controller fault message alone. Test the affected circuit before choosing a replacement.
- Ignoring the model or station number. ERR by itself is not the same clue as a numbered station ERR.
- Repeatedly clearing the message. A reset does not repair damaged wiring or a shorted solenoid.
- Digging or opening wiring compartments without a diagnosis. Start with the information on the screen and leave circuit testing to a qualified professional.
When to Book Sprinkler Controller Repair in Fairview
If the same sprinkler controller fault message returns, a station will not run or the display points to a wiring fault, schedule a sprinkler controller evaluation. Whale Done Sprinklers & Irrigation serves Fairview homeowners with controller, wiring and valve diagnostics. Texas irrigator license LI0029200.
Our guide to what happens during controller troubleshooting in Fairview explains the service visit. If the issue involves scheduling, power or a sensor rather than a fault code, see our sprinkler controller problems guide.
Frequently Asked Questions
Why does my sprinkler timer show an error?
An irrigation controller error code reports a condition detected by that model, such as a station-circuit fault or missing AC power. Record the exact code and model, then use its manual. The message guides diagnosis; it does not automatically mean the timer needs replacing.
Can I keep using my sprinklers with one zone showing a fault?
Some controllers skip an affected station and continue with others; behavior depends on the model and fault. Check the manual. If the message involves a master valve, pump circuit, recurring electrical fault or visible damage, arrange a diagnosis rather than assuming the rest of the system is unaffected.
Why did the fault message appear after yard work?
Yard work can disturb buried irrigation wiring or connections. Tell the technician where the work happened and when the message first appeared. The circuit still needs testing before a damaged wire can be confirmed.
Will replacing the controller clear the fault?
A new controller will not repair a shorted field wire or failed valve solenoid. Testing can also reveal whether the controller itself has an output problem. Replace the component that has been diagnosed as faulty, rather than choosing from the error message alone.
Is Your Controller Showing an Error?
Schedule a sprinkler controller evaluation with Whale Done Sprinklers & Irrigation in Fairview. Share a photo of the display and your controller model when booking, or call 469-966-2516.


